Por favor, use este identificador para citar o enlazar este ítem: http://ciateq.repositorioinstitucional.mx/jspui/handle/1020/609
Al7075 composites reinforced with Al2O3 and CNT particles
Luis Eusebio Cardoso Lozano
Bertha Laura Vargas Rodríguez
HUGO ARCOS GUTIERREZ
Cynthia Deisy Gómez Esparza
Fernando Pérez Bustamante
Raúl Pérez Bustamante
Acceso Abierto
Atribución-NoComercial-CompartirIgual
https://www.cambridge.org/core/journals/microscopy-and-microanalysis/article/al7075-composites-reinforced-with-al2o3-and-cnt-particles/48F4443DCD963AAFAA887ED97AA87DCF
https://doi.org/10.1017/S1431927622010431
https://www.cambridge.org/core/journals/microscopy-and-microanalysis
The present research involved the synthesis of aluminum composites reinforced with alumina nanoparticles and CNTs. For this purpose, a combination based on powder metallurgy routes and mechanical alloying was considered. The process of mechanical alloying (MA) was carried out in a high energy mill Spex 8000 mixer/mill. The mass of the powders was 8.5 g and a ball-to powder weight ratio was 5:1. All millings runs were performed with methanol as process control agent with argon was as inert milling atmosphere. The milling time was set 5 h. The alumina and nanotubes concentration was set to 5.0 wt.%. The microstructural behavior was screened by scanning electron microscopy and X-ray diffraction patterns.
Microscopy Society of America
2022
Artículo
Microscopy and Microanalysis, vol. 28, Supplement S1, p. 2770-2771
Inglés
Público en general
Cardoso-Lozano, E., Vargas-Rodriguez, B. L., Arcos-Gutierrez, H., Gómez-Esparza, C. D., Pérez-Bustamante, F., & Pérez-Bustamante, R. (2022). Al7075 Composites Reinforced with Al 2 O 3 and CNT Particles. Microscopy and Microanalysis, 28(S1), 2770-2771. https://doi.org/10.1017/S1431927622010431
OTRAS
Versión publicada
publishedVersion - Versión publicada
Aparece en las colecciones: Artículos Publicados en Revistas Indexadas

Cargar archivos: